Levelling The Refrigerator; Making Minor Adjustments To The Doors - Samsung RS-21 KLMR User Manual

LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you
will want to make sure the refrigerator is level so you
can then make fi nal adjustments. If the refrigerator
is not level, it will not be possible to get the doors
perfectly even.
The front of the refrigerator is also adjustable.
When the Freezer door is lower than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the freezer.
Screw Driver Screw Driver
When the Freezer door is lower than
the fridge
Insert a fl at-blade screwdriver into a notch on the
Leg, turn it clockwise or counter clockwise to level
the fridge.
Refer to the next section for the best way to
make very minor adjustments to the doors.
10_ setting up
Downloaded from Fridge-Manual.com Manuals
DA99-02028F(0.5).indb 10 DA99-02028F(0.5).indb 10
Leg Leg
Leg Leg
Screw Driver Screw Driver
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for
getting the doors perfectly even. If you need
help, review the previous section on levelling the
refrigerator.
When the door of the freezer is When the door of the freezer is
higher than the fridge higher than the fridge
In the process for adjusting both the doors is the
same. Open the doors and adjust them, one at a
time, as follows:
1. Unscrew the
nut from the
1
lower hinge until it
reaches the upper
end of the bolt .
2
When you release the nut
that you use the Allen wrench provided
2
to loosen the bolt
direction.
You should then be able to unscrew the nut
1
with your fi ngers.
2. Adjust the
height difference
between the doors
by turning the
bolt clockwise
2
or counter
clockwise .
When you turn clockwise
move up.
3. After adjusting the
doors, turn the
nut clockwise
1
until it
reaches the lower
end of the bolt,
then tighten the bolt again with the wrench lt
fi x the nut in place .
1
If you do not secure the nut fi rmly, the bolt
may release.
Adjustment part Adjustment part
3
Wrench Wrench
2
Bolt Bolt
1
Nut Nut
1
, make sure
3
in a counter-clockwise
3
Wrench Wrench
2
Bolt Bolt
, the door will
3
Wrench Wrench
2
Bolt Bolt
1
Nut Nut
i ith th to
3
2012.2.14 2:23:58 PM 2012.2.14 2:23:58 PM