Diverse 3016 Classic
Making and receiving calls
To make an external call
Ensure the handset is switched
ON.
Press the GREEN PHONE
button. You will hear the dial
tone.
Dial the number. The phone
KEYPAD
calls the number and the
display shows the number you
have dialled.
Alternatively, you can enter the
phone number you want first,
check that it is correct, and
then press the GREEN PHONE
button to dial.
If another handset is already being used
to make an external call, your handset
will display '–––' flashing and you will
hear the internal 'busy' signal.
To end a call
Press the RED PHONE button.
22/3/01
2:09 pm
Diverse 3016 – 4th Edition – 1st March – 3766
Note
Page 15
To receive an external call
When the phone rings the
display flashes EXT .
Press the GREEN PHONE
button on the handset and
speak.
Or
If the handset is on the base
station or charging station,
simply lift it up and speak.
You do not need to press the
GREEN PHONE button.
At the end of the call, either
press the RED PHONE button
or replace the handset on the
base station.
Caller Display
The Diverse 3016 Classic can let you
know who's calling before you answer
the telephone.
With BT's Caller Display service, your
Diverse base station receives caller
information which is transmitted over
the BT network, for more information
see page 23.
Call timer
Your Diverse 3016 Classic automatically
times the duration of all outgoing external
calls. The handset display shows the call
duration both during your call and for a
few seconds after it is completed.
15