Advertisement
3
Using your phone
You'll need Caller Display
To get the most from your nuisance call blocker phone and for all the features to work,
you'll need to subscribe to a Caller Display service from your network provider.
Charges may apply.
Making and receiving calls
Make and end a call
Press green
then dial the phone number. Press red
Answer a call
Press green
when the phone is ringing.
To answer a call without having to press
, you can set Auto Pick-Up to On. To do this,
press
, scroll to Personal Set, press
. Scroll to Auto Pick-Up and press
to On and press
.
Mute
Press
during a call. Press
to return to your caller.
View or dial a number in Calls list
The Calls list stores details of the last 50 incoming calls.
1
Press
, then
. Press
or
to scroll through the list.
2
Press
to dial the number.
Nuisance Call Blocking
†
Block an incoming call number in your Call list
1
Press
to enter the Call Log. Call List is displayed, press
you want to block and press
.
2
Scroll down to Call Block, press
.
3
Screen will show the number that will be blocked. Press
as soon as call blocking is turned on following the instructions below.
Turn call blocking on to enable block list
1
to Call Block and press
Press
, scroll
again. Enter default PIN 0000.
2
Scroll to Blacklist and press
. Then scroll to Block mode and press
3
Scroll to Block List and press
.
4
Scroll to Always On to enable the block list feature. Or, you can set the feature to
block calls from your block list between set times, using the Start & end options.
Phonebook
Store entry in phonebook (up to 50)
1
Press
, scroll to Phonebook and press
again. Scroll
2
Enter name using keypad and press
.
3
Enter phone number and press
to save.
4
Add to VIP? is displayed. Press
if you want to add to your VIP list. Saved!
is displayed. Or, press
to save as a normal contact without adding to the VIP list.
To save a number to your phonebook from the Calls list, press
number and press
. Save Number is displayed, press
Edit the number if required, press
to save.
Dial entry in phonebook
1
From the home screen, press
.
2
Scroll
or
to display the entry and press
to dial.
Handset buttons and display icons
New missed call received
Flashing – incoming call
Battery charge status
Empty and flashing when
Menu / Left option button
Press to enter the main menu, access
to end the call.
sub-menus and confirm options.
Move up through menu options.
. Scroll
In standby mode, make/receive phone calls.
In talk mode switch handsfree on/off.
Access your stored phonebook.
†
Move down through menu options.
Long press to make an internal call to another handset
registered to the base if only two handsets are registered.
Long press to enter intercom handset select list if there are
more than two handsets registered to the base.
Using the menu
•
Press
to open the main menu, scroll through using
. Then scroll to the entry
you want is displayed, press
press
to select.
•
and
buttons let you select options displayed above the buttons on the display.
and number will be blocked
•
Use
to exit a menu or go back.
•
If no buttons are pressed for 30 seconds the handset will return to the idle screen.
again.
Handset volume and sounds
Incoming speech volume
During a call, press
Handset ringer volume
1
Press
, scroll
2
Handset Tone is displayed, press
to New Entry, press
.
3
Ring Volume is displayed, press
4
Scroll
or
Handset ringtone
, then
. Scroll to the
1
Press
, scroll
. Enter name and press
.
2
Handset Tone is displayed, press
3
Scroll
to Ring Melody, press
4
Press
or
Alarm is set
Phonebook open
Handsfree on
Handset ringer off
Line is in use
Signal strength
Handset name
needs recharging
Do Not Disturb
In standby mode, press to silence all calls
including those in your VIP list. Press again
to switch this mode off.
Mute / Right option button
Press to confirm the option above the
button, to delete or go back to the
Enter Call log.
previous screen.
Press during a call to mute your caller.
Increase volume.
Press again to speak to your caller.
Open redial list.
Recall (R) used when connected to
a switchboard/PBX and with some
BT Calling Features.
Press and hold to enter a Pause (P).
End a call.
Press and hold to turn handset on/off.
Decrease volume.
to
Speed dial buttons
In standby, press and hold to dial a
stored speed dial number.
or
. When the menu
. Press
or
to scroll through the sub menus and
or
to increase or decrease the volume of your caller's voice.
to Personal Set, press
.
.
.
to adjust the volume, press
to save.
to Personal Set, press
.
.
.
to hear ringtones, press
to save.
Using the keypad
•
When entering letters you may need to press the same button a few times until the
letter you want is displayed, e.g. press
once for A, twice for B, three times for C
•
To enter a space, press
.
•
To toggle between upper and lowercase characters, press and hold
Troubleshooting
Most problems can be fixed with a few simple checks.
Problem
Solution
No dial tone
Only use the cables supplied.
Make sure the telephone line cord is plugged in correctly.
Handset not charging
Make sure the handset is turned on before placing on the
base or charger to charge.
Phone ringer does not ring
The ringer volume may be set to Ringer off. Adjust the
handset Ring volume. Check that Block mode or Do Not
Disturb is not switched on.
Using broadband on the
To avoid problems with your broadband or noise on your
same phone line?
phone line, you might need to plug your telephone line
cord into the wall via a microfilter (not supplied).
If your main phone socket
has a single socket,
as shown, you'll
need to use
microfilters.
What's the
button on
Press
and all handsets registered to the base will ring.
the base used for?
Once found, press
again to stop the ringing.
The
is also used when registering additional
handsets, press and hold to enter registration mode.
See the full user guide online for registration instructions.
Need some help?
Frequently asked questions and a full user guide are available online.
bt.com/producthelp
If you cannot find the answer to your question in the full online user guide,
call our free Helpline. Our dedicated advisors are more likely to be able to
help you than the retailer where you bought your phone.
0800 145 6789*
This user guide is also available in other formats: large print, Braille and audio CD.
Call the helpline for a copy.
* Calls made from within the UK mainland network are free. Mobile and international call costs may vary.
† Requires a subscription to a Caller Display service from your network provider. Charges may apply.
.
You don't need to use
microfilters if your main
phone socket has two
separate sockets, like
either of these:
Advertisement
