Flashlight; Sd Cards - Juniper archer 2 Owner's Manual

Hide thumbs Also See for archer 2:
Table of Contents

Advertisement

Flashlight

Geo units have a flashlight located underneath the camera
window in the back of the Archer 2.
The flashlight gadget
order to use it. Tap on the icon once to turn on the brightest
illumination. Tap the gadget again for medium brightness,
and a third time to turn it off.
Note: This is also the camera flash.

SD Cards

The Archer 2 has a slot for a micro SD card located in the
battery compartment. To insert or remove a card follow
these steps:
1. Power off the handheld by holding the power button until
the Power Button menu appears and selecting Power Off..
2. Loosen the screws to the battery compartment, and
remove the door. The hand strap remains attached.
!
CAUTION: The Archer 2 is not sealed against water and
dust when the battery door is not installed properly.
3. Remove the battery pack.
4. An image on the battery compartment label shows the
correct location and orientation for the SD card (slot
on the right). Push the card into the slot to insert it. To
remove the SD card, pull it out.
26
Archer 2 Rugged Handheld Owner's Manual
must be on the Home screen in

Advertisement

Table of Contents
loading

Table of Contents