Setting The Surface Time Notify Alarm (Free Mode); Setting The Sample Rate - Suunto D4i User Manual

NOTE

5.9.8. Setting the surface time notify alarm (FREE mode)

You can set the Surface Time Notify Alarm to indicate the length of the surface time
before a new dive. Suunto D4i starts counting the time automatically when you surface
(at 0.5 m/1,6 ft).

5.9.9. Setting the sample rate

The Sample Rate setting controls how often the depth, tank pressure (if enabled), and
water temperature is stored in the memory.
With a range of 1–999 minutes, the alarm can be set to your
planned bottom time, for example.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
ADJUST WITH UP AND
DOWN BUTTONS. ACCEPT
WITH SELECT BUTTON.
47