Battery Replacement; Wireless Transmitter Battery Replacement - Suunto D6i User Manual

9. BATTERY REPLACEMENT

NOTE
CAUTION
All history and profile data, as well as the altitude, personal, and alarm settings, will
remain in the dive computer memory after the battery change. However, the clock
time and time alarm settings are lost. In the NITROX mode, the gas nitrox settings
also revert back to default settings (Mix1 21% O
OFF).

9.1. Wireless transmitter battery replacement

NOTE
It is advisable to contact an authorized Suunto representative for
battery replacement. It is imperative that the change is made in
a proper manner to avoid any leakage of water into the battery
compartment or computer.
When the battery is changed, all nitrogen and oxygen uptake data
is lost. Therefore, the no-fly time shown by the computer should
have reached zero or you must wait for 48 hours, or preferably
up to 100 hours, before you dive again.
It is advisable to contact an authorized Suunto representative for
transmitter battery replacement. It is imperative that the change
is made in a proper manner to avoid any leakage of water into
the transmitter.
, 1.4 bar PO , Mix2 OFF, Mix2-Mix8
2 2
107