Lexmark X6100 Series User Manual page 90

Error messages and flashing lights
Use this section to understand All-In-One software error messages on your
computer screen or control panel display and blinking lights on your
All-In-One.
Ink Low message
A print cartridge is running out of ink. The Ink Low warning occurs when
your cartridges are about 25% full, 15% full, and 5% full. When one of
these messages appears, you can:
•
Click OK.
•
Click the ? to get information about ordering supplies.
•
Order a new cartridge or locate a dealer near you from the Lexmark
Web site at www.lexmark.com.
For help installing a new cartridge, see page 64.
Paper Jam message
If your All-In-One has a paper jam:
1
Click Start
Lexmark X6100 Series Solution Center.
2
Click the Troubleshooting tab on the left side of the screen.
3
Click How to clear and avoid paper jams.
4
Follow the instructions to clear the paper jam.
Paper Out message
If your All-In-One is out of paper, Load paper then press Select
appears on the display.
1
Follow these instructions to clear the message from the display.
2
Print your document.
Note: If your All-In-One has a paper jam, see page 86 for help.
Programs Lexmark X6100 Series
86