Lexmark X6100 Series User Manual page 8

Use the:
Automatic Document
Feeder (ADF)
ADF exit tray
ADF input tray
Display
Control panel
Paper exit tray
Paper support
Power supply connector
Scanner lock
Scanner support
Scanner unit
Telephone/answering
machine connector
Top cover
USB cable connector
Wall jack connector
When you want to:
Copy or fax multiple pages.
Pick up your original document after it has gone
through the ADF.
Load original documents in the All-In-One.
Check the status of the All-In-One or view settings.
Operate your All-In-One (attached to a computer or
unattached). For more information, see page 5.
Stack paper as it exits the All-In-One.
Load paper in the All-In-One.
Supply power to the All-In-One.
Lock or unlock the scanner.
Note: Lock the scanner if you are moving your
All-In-One. Unlock the scanner before use.
Keep the scanner unit open.
• Install or change print cartridges.
• Lock or unlock the scanner.
Note: Lift the scanner unit to do these things.
Connect an answering machine or telephone to your
All-In-One.
• Place an item on the scanner glass.
• Remove an item from the scanner glass.
Note: Lift or remove the top cover to do these
things.
Connect your All-In-One to a computer.
Connect the telephone line.
4