Lexmark X6100 Series User Manual page 10

Press:
Power
Stop/Clear
Copy
Scan
Fax
Quality
Number of Copies
Lighter/Darker
Reduce/Enlarge
Left arrow
Select
To:
Turn your All-In-One on or off.
Note: To enter the state of lowest power consumption,
press and hold the Power button for at least five
seconds.
• Cancel a scan, print, or copy job in progress.
• Clear a fax number or end a fax transmission and
return the display to the fax default.
• Exit a menu.
• Clear current settings and return to default settings.
Enter copy mode.
Note: This button is lit when the All-In-One is in copy
mode.
Enter scan mode (possible when the All-In-One is
attached to a computer).
Note: This button is lit when the All-In-One is in scan
mode.
Enter fax mode. The All-In-One can receive a fax while in
any mode.
Note: This button is lit when the All-In-One is in fax
mode.
• Select from the following copy qualities: Quick,
Normal, Better, or Best.
• Select a fax resolution: Standard, Fine, Superfine, or
Ultrafine.
• Select a scan resolution when the All-In-One is
attached to a computer.
Specify a number (1-99) of copies.
Lighten or darken a copy or fax.
Customize the size of your original document by a
percentage, Fit to Page, or to poster size.
• Decrease a number on the display.
• Scroll through a list on the display.
Choose the option that appears on the display.
6