Precor C554i Manual page 43

10. Slide the large plastic spacer onto the stairarm peg. Slide the spacer into the bushing in the
handlebar linkage and place a washer on each side of the spacer. Set the handlebar linkage
at its mounting position and fasten it with the bolt removed in step 3. Torque the handlebar
linkage bolt to 200 inch pounds. Snap the plastic cap removed in step 3 into the handlebar
linkage.
11. Set the stairarm pedal at its mounting position, install and hand tighten the stairarm pedal
mounting hardware removed in step 6. Torque the stairarm pedal mounting bolts to 60 inch
pounds.
C554i Self Powered Elliptical Fitness Crosstrainer
Page 43