Manual Upgrade - BT 1010 User Manual

Software upgrades
64
While the handset is being
updated, the update cannot be
cancelled. If the user takes out the
handset from the cradle, the
update is interrupted. If the user
puts it back within 90 seconds,
the update will resume and will be
completed correctly. If the user
doesn't put it back within 90
seconds, then the handset is
unusable and the user needs to
use the rescue mode from the
hub, see page 65.
If you try to upgrade using the
menu and the reminder was not
displayed when in standby, it
means that there is no upgrade
available. You will see the message
NO UPGRADE AVAILABLE.

Manual upgrade

If new software is available and you selected to upgrade
later, you can manually upgrade the software at any time
using the handset menu.
1. Press Menu to access the menu.
2. Press or to scroll and display
press OK .
3. Press or until
and press OK
4. CHECK SOFTWARE
5. As requested, place the handset on the charger linked to
the hub. The display shows
upgrade is complete,
and the handset resets and automatically re-connects to
the base.
HANDSET
HANDSET SOFTWARE
.
is displayed, press OK
UPGRADING
UPGRADE SUCCESSFUL
and
is displayed
to confirm.
. When the
is displayed