BT 1010 User Manual page 58

Using additional handsets
58
If your handset is already registered
to a base, the * symbol will be
shown to the right of the base
number.
If there are already 5 handsets
registered to the base you will hear
a double beep.
Each digit of the PIN code will be
displayed as a for security
*
reasons.
Press Clear if you enter an
incorrect digit.
If you enter the wrong PIN code
you will hear a double beep.
If registration fails, the handset will
return to standby mode and you
will need to repeat the registration
procedure and try a different base
number.
2. Press or to scroll and display
OK
press .
3. REGISTER HANDSET
BASE 1
4. is displayed. Press
number you want to register to and press
5. SYSTEM PIN is displayed. Enter the PIN code using the
keypad and press
registration.
BASE SEARCH X
6. is displayed (where X is the base
number). When registration is successful
REGISTERED is displayed. Press
standby.
The handset will automatically be allocated the next
available handset number which will be displayed when in
standby mode.
REGISTRATION
is displayed, press OK
or to select the base
OK to confirm and begin
OK
and
to select.
OK .
HANDSET
to return to