Declaration Of Conformity; General Safety Instructions - Metabo KHE 2650 Original Instructions Manual

en ENGLISH
Original instructions

1. Declaration of Conformity

We declare under our sole responsibility: These
rotary hammers, identified by type and serial
number *1), comply with all relevant requirements of
the directives *2) and standards *3). Technical file
at *4) - see page 3.
2. Specified Use
With the appropriate accessories, these rotary
hammers are suitable for work with hammer drill bit
and chisels into concrete, stone and other such
materials and with core cutters in tiles and other
such materials, as well as for non-impact drilling into
metal, wood etc. and for driving screws.
The user bears sole responsibility for any damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.

3. General Safety Instructions

For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your electrical tool only together with these
documents.
4. Special Safety Instructions
Wear ear protectors. Exposure to noise can cause
hearing loss.
Use the additional handle supplied with the
tool. Loss of control can cause personal injury.
Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
Work only with the additional handle correctly
installed.
Always hold the machine with both hands using the
handles provided, stand securely and concentrate.
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
8
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in
conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Where the use of a dust extraction device is
possible it shall be used.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Always wear protective goggles, gloves, and sturdy
shoes when working with this tool.
Ensure that the spot where you wish to work is
free of power cables, gas lines or water pipes
(e.g. using a metal detector).
If the safety coupling responds, switch off the
machine immediately.
Do not touch the rotating tool!
Remove chips and similar material only with the
machine at standstill.
Caution with hard screwdriving (driving of screws
with either a metric or an imperial thread into steel)!
The head of the screw may rip off or high restoring
torques may be incurred at the handle.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
Secure the workpiece to prevent slipping or rotation
(e.g. by securing with screw clamps).
Safety coupling: If the tool jams or catches, the
power supply to the motor is restricted. Due to the
strong force which can arise, always hold the
machine with both hands using the handles
provided, stand securely and concentrate.
5. Overview
See page 2.
1 Keyless chuck *
2 SDS chuck
3 Tool lock
4 Keyless chuck sleeve *
5 Chuck lock
6 Spindle
7 Wing screw (for adjusting the depth stop)
8 Depth stop
9 Speed preselection wheel*
10 Electronic signal indicator*
11 Rotation selector switch
12 Lock button
13 Trigger
14 Switch button (for changing the operating
mode)
15 Lock
16 Additional handle