100
Destination
192.168.1.0
192.168.0.0
So if, for example, Client3 wants to send an IP data packet to 192.168.0.2 (Client 2), it would use the above table to determine that it
had to go via 192.168.123.103 (Router 2)
And if it sends Packets to 192.168.1.11 (Client 1) will go via 192.168.123.216 (Router 1).
Subnet Mask
Gateway
255.255.255.0
192.168.123.216
255.255.255.0
192.168.123.103
Hop
Interface
1
LAN
1
LAN