Table of Contents
Advertisement
14.
Tighten the screws that secure the lamp
cover.
CAUTION
•
Loose screw may cause a bad connection,
which could result in malfunction.
•
Do not over tighten the screws.
15.
Restart the projector.
CAUTION
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
16.
After the startup logo, open the On-Screen
Display (OSD) menu.
17.
Go to the SYSTEM SETUP: Advanced >
Lamp Settings menu. Press MODE/ENTER
on the projector or ENTER on the remote
control. The Lamp Settings page is
displayed.
18.
Press
press MODE/ENTER on the projector or
ENTER on the remote control. A warning
message is displayed asking if you want to
reset the lamp timer.
19.
Highlight Reset and press MODE/ENTER
on the projector or ENTER on the remote
control. The lamp time will be reset to '0'.
CAUTION
Do not reset if the lamp is not new or replaced as this
could cause damage.
Downloaded From projector-manual.com Viewsonic Manuals
to highlight Reset lamp timer and
Notice
Reset Lamp Timer?
Reset
Cancel
Maintenance
73
Hide quick links:
Advertisement
Table of Contents
