Color Mode - ViewSonic VS13339VS13340 User Manual

Function

Color Mode

Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant
Color
Color
Temperature
Save
Settings
Quick Auto
Search
PointBlank
64 Operation
Downloaded From projector-manual.com Viewsonic Manuals
Pre-defined picture modes are provided so you can optimize
your projector image set-up to suit your program type. See
"Selecting a picture mode" on page 31
Selects a picture mode that most suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See
mode" on page 32 for details.
Adjusts the brightness of the image. See
on page 32 for details.
Adjusts the degree of difference between dark and light in the
image. See "Adjusting Contrast" on page 32
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 33
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 33
The function is only available when Video or S-Video with
NTSC system is selected.
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 33
Adjusts white peaking while maintaining correct color
presentation. See "Adjusting Brilliant Color" on page 33
details.
See "Selecting a Color Temperature" on page 33
Saves the settings made for the User 1 or User 2 mode.
See "Switching input signal" on page 26
See "Using the PointBlank pen (PJD7383i/PJD7583wi only)" on
page 53 for details.
Description
for details.
"Setting the User 1/User 2
"Adjusting Brightness"
for details.
for details.
for details.
for details.
for details.
for
for details.