Using The Pointblank Pen (Pjd7383I/Pjd7583Wi Only) - ViewSonic VS13339VS13340 User Manual

Using the PointBlank pen (PJD7383i/PJD7583wi
only)
The PointBlank pen can work in place of your regular computer mouse. Just hold the pen in
your hand, and point it at the projected image to point, click, and drag. It gives you more
flexibility to operate your computer without standing next to it.
Preparations
1. Connect the projector and your computer with a VGA cable, and a USB cable.
2. Turn on your computer and the PointBlank-compatible projector. Make sure the
projector is displaying the computer's screen.
3. Enable the pen by selecting "Yes" in the SOURCE > PointBlank > Enabled menu.
The pen's link light starts to blink.
4. Point the pen at the screen to point, click, and drag. Observe the pen's light. It should
blink at a slower pace when it links to the projector.
Overview of the PointBlank pen
Using the PointBlank pen
Hold the pen the way you hold a remote control or a pen.
More settings are available on the SOURCE > PointBlank menu.
You can adjust the click speed of your pen with the Click Speed menu to make it response
faster or slower to meet your needs.
Downloaded From projector-manual.com Viewsonic Manuals
Left mouse button
Middle button
Link light
Battery light
TYPE B TYPE A
LAN USB USB
RS 232 MONITOR OUT
Sensor
Right mouse button
USB connector
Reset button
S-VIDEO AUDIO IN2 (R)
AUDIO
IN1
AUDIO
COMPUTER IN1
OUT
MIC
VIDEO AUDIO IN2 (L)
COMPUTER IN2
Tip
Operation 53