Table of Contents
Advertisement
DVR: Setup (Alarm)
Step 7:
Linkage Setup
Press the "RETURN" button to return to the Alarm Setup
menu, and then select the Linkage Setup interface. This device
provides two alarm outputs.
You can select none/output 1/output 2 from the linkage
setup menu. 12V of high level is generated to drive other
optoelectronic devices when the related alarm is triggered.
(For detailed connection methods, please refer to the alarm
input/output cable connection section.
Linkage Setup Interface
1.
Enabling or disabling of write metadata is used to check if
related alarm information is written tot the video file.
2. To ensure your option changes are saved when you are
done, move your cursor to the "Save" button and then
press the "Enter" button.
42
Open to record related
alarm logs.
FIG. 27
This page left intentionally blank.
DVR: Setup (Alarm)
43
Advertisement
Table of Contents
