Table of Contents
Advertisement
DVR: Setup (Alarm)
Alarm Setup
Step 1:
Enter the Alarm Setup interface.
Press the "RETURN" button to return to the Setup Menu, and
select the Alarm Setup interface. Here you can set the sensor,
speed, acceleration, temperature, motion detection, linkage
settings and other alarm modes. The alarm feature can only be
used when an external sensor is connected.
Different types of recordings are created depending which
alarm type you choose for each alarm setting.
•
If an "Event" is selected for the alarm type, a normal
recording is conducted.
•
If an "Alarm" is selected for the alarm type, an alarm
recording is conducted.
•
The "threshold" indicates the point at which an alarm is
triggered.
Alarm Setup Interface
36
FIG. 21
Step 2:
Sensor Setup
This device provides eight (8) SENSOR-IN inputs and can be
set with a high level alarm. From the Alarm Setup menu, select
the "Sensor" icon, and press the "ENTER" button to enter the
sensor alarm options. Set the alarm "Enable" to "ON" and
name the sensor as required.
You can select the video
monitoring channel
corresponding to this
sensor. When the alarm
is triggered, the monitor
will automatically pop
up this channel and
magnify the video
image on this screen.
When Enable is set to
"ON", it generally takes
a high level over 5V to
trigger the alarm.
Alarm Sensor Setup Interface
1.
Output delay indicates that the alarm output is set in the
alarm linkage, i.e. when the alarm is off, the alarm outputs
within the set delay time.
2. Be sure to use the Link To setting to assign this sensor
alarm to a specific input channel to monitor.
3. To ensure your option changes are saved when you are
done, move your cursor to the "Save" button and then
press the "Enter" button.
FIG. 22
DVR: Setup (Alarm)
37
Advertisement
Table of Contents
