Table of Contents
Advertisement
DVR: Setup (Recording)
Step 4:
Sub-Stream Setup (WiFi Option Only)
Press the "RETURN" button to return to the Record Setup
Menu, then enter the Sub-Stream settings interface.
This setting is directly related to definition and fluidity of
the video on the CMS software. The higher the resolution,
frame rate and bit rate are, the better looking the video will
be. However, this requires more storage space, memory and
bandwidth. So far, 3G networks allow only transmission of CIF
in real-time. CIF and QCIF can be set for each sub-stream.
Sub-Stream Setup Interface
1.
Either CIF or QCIF is optional for sub-stream resolution.
Currently, the maximum CIF real-time transmission
capabilities are only available via a 3G network.
2. To ensure your option changes are saved when you are
done, move your cursor to the "Save" button and then
press the "Enter" button.
34
You can set each
sub-stream to a
fixed-bit rate (CBR) or
Variable Bit Rate (VBR),
16-384bit/s rates are
available.
96bit/s is the default.
FIG. 19
Step 5:
Recording Schedule
(to be set in timing record mode NOT recommended for Department use)
Press the "RETURN" button to return to the Record Setup
Menu, then enter the Recording Schedule settings interface.
If "Timing Record" mode (not commonly used) is selected
under Record Mode in the General Options, you must set the
record time frame here (two time frames can be selected).
Recording Schedule Setup Interface
1. The Recording Schedule can only be set when the
"Timing Record" mode is selected under Record Mode in
the General Options.
2. To ensure your option changes are saved when you are
done, move your cursor to the "Save" button and then
press the "Enter" button.
FIG. 20
DVR: Setup (Recording)
35
Advertisement
Table of Contents
