Table of Contents
Advertisement
DVR: Setup (Alarm)
Step 3:
Speed Setup
Press the "RETURN" button to return to the Alarm Setup menu,
and then select the Speed Setup interface. If the temperature
alarm feature is enabled, this information can be transmitted to
the central CMS system.
This setting will trigger a
recording when the vehicle
reaches the set speed. Low
speed is not used in normal
use.
Speed Setup Interface
To ensure your option changes are saved when you are done,
move your cursor to the "Save" button and then press the
"Enter" button.
38
FIG. 23
Step 4:
G-Sensor Setup
Press the "RETURN" button to return to the Alarm Setup menu,
and then select the G-Sensor Setup interface. When transient
acceleration is high during braking, turning, acceleration or
collision, the sensors will indicate that the threshold value has
changed quickly.
G-Sensor Setup Interface
The G-sensor alarm
requires calibration when
initially set. Stop the vehicle
on a flat, level surface to
set it.
FIG. 24
DVR: Setup (Alarm)
39
Advertisement
Table of Contents
