Resetting A Key To Its Original Function; Service And Support; Frequently Asked Questions - Philips SRP5004 User Manual

3.3
When resetting a key to its original function, any learned
function stored under the key will be deleted.
1
2
3

4 Service and support

4.1
In this chapter you will find answers to the most frequently
asked questions about your universal remote control.
I cannot enter setup mode.
Battery level too low or battery lifetime came to an end.
• R eplace the batteries. For this see chapter 2.1.
12
SRP5004_86_Manual_Def.indd 12

Resetting a key to its original function

In the current device
mode, keep digit keys
pressed
and
simultaneously for 5 seconds,
until the red Setup LED
lights up.
• T he remote control is now in setup mode.
Press digit keys
and , in that order.
• A fter each key press
the device selection key
blinks once.
Press the key you wish to
reset twice. E.g. the 22 key.
• A fter each key press
the device selection key
blinks once.
• T he device selection key
will blink one more time to confirm that the key was
succesfully reset to its original function.
• The key can now also learn a new function, if desired.

Frequently asked questions

Setup
EN
5 sec.
, ,
2 x
01-06-09 12:34