Related Manuals for Philips SRP5016
Summary of Contents for Philips SRP5016
- Page 1 Universal Remote SRP5016 TAPR802 User manual Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Contents 1 Your universal remote Introduction 2 Get started Insert batteries (not included) Set up the universal remote 3 Use your universal remote control Learning 4 Notice Disposal of your old product and battery 7 5 Service and support Frequently asked questions Need help? -
Page 3: Your Universal Remote
: pause : record : rewind Congratulations on your purchase, and : play welcome to Philips! To fully benefit from the : fast forward support that Philips offers, register your product at www.philips.com/welcome : previous track. STREAM: shortcut to Netflix or other App. -
Page 4: Get Started
2 Get started Supported devices Device name Description TV, DTV Insert batteries (not included) Cable box, satellite receiver, IPTV, DVR, HDTV decoder and TiVo MEDIA Streaming devices, Apple TV, Roku, Sony, WD TV, Netgear DVD player/recorder, Blu-ray player S.BAR Sound bar, home theater, audio system Warning •... -
Page 5: Set Up The Universal Remote
Set up the universal remote You must first set up the universal remote before operating your devices. Set up by code selection Enter the first 5-digit code using the digit buttons. Switch on your device. If the light is off, a valid code is saved. Otherwise, the light will flash six times, and Press and hold the device selection button then remains on for code re-entry. - Page 6 seconds as the universal remote searches, Note indicated by a blue flash. • It is possible sometimes that your device only responds to some of the buttons. In such case, set up with the next code in the code list, and try operating your device again.
-
Page 7: Use Your Universal Remote Control
3 Use your Repeat from step 3 to learn other key functions, or press and hold any key for 3 universal secouds to terminate the learning mode, the LED indicator will go out immediately. remote control Note • On Step 4, if no key is selected for more than 15 seconds, the LED indicator will flash six times and the learning mode will exit automatically. -
Page 8: Notice
4 Notice Removing the disposable batteries To remove the disposable batteries, see section ‘Insert batteries’. Disposal of your old product When this logo is attached to a product, it and battery means a financial contribution has been paid to the associated national recovery and recycling system. -
Page 9: Service And Support
When calling our helpline, make sure to have My universal remote does not work at all. the SRP5016 at hand when you call, so that our • Check if you have correctly setup the operators can help you determine whether device with the right code. - Page 10 Specifications are subject to change without notice. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its affiliates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.