3.2
If an improved button (see chapter 2.2.2) still
does not function as expected, you can always
reset the button to its original function.
1
2
3
P2063WM_17__Manual 11
R esetting a button to its
original function
I n the current
device mode, keep
digit buttons
and
pressed
simultaneously for 5
seconds, until the
red Setup light lights up.
• T he remote control is now in setup mode.
P ress digit buttons
,
, and
that order.
• A fter each
button press
the red Setup
light blinks once.
P ress the button
that you wish to
reset twice. E.g. the
22 button.
• A fter each
button press
the red Setup light blinks once.
• T he red Setup light will blink one
more time to confirm that the button
was succesfully reset to its original
function.
5 sec.
, in
2 x
EN
11
25-11-09 13:1