Features And Controls - Snapper 2691249-00 Operator's Manual

Front-engine rider
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Features and Controls

See Figure 2 for location.
Brake Pedal
Depressing the brake pedal applies the tractor
brake.
Cruise Control
This locks the ground speed control in forward.
The cruise control has five lock positions.
Electronic Dashboard
See Electronic Dashboard section.
Fuel Tank
To remove the cap, turn counterclockwise.
Ground Speed Pedals
The forward ground speed pedal controls the
tractor's forward ground speed. The reverse
ground speed pedal controls the tractor's reverse
ground speed.
Headlight Switch
This turns the tractor headlights on and off.
Height-of-Cut Switch
This adjusts the mower cutting height. Press the
switch UP to raise the mowing cutting height
and DOWN to lower the mower cutting height.
The height-of-cut is displayed on the electronic
dashboard.
Parking Brake
This locks the parking brake when the tractor is
stopped. See Parking Brake section.
Power Outlet (12V-DC)
12V
The power outlet is 12V-DC. Accessories must be
rated at 9 amps or less.
Power Take-Off (PTO) Switch
The PTO (Power Take-Off ) switch engages and
disengages the mower blade clutch. To engage
the PTO, pull UP on the switch. Push DOWN to
disengage.
NOTE: The operator must be seated firmly in the
tractor seat for the PTO to function.
Reverse Mowing Option (RMO)
This allows the operator to mow (or use other
PTO driven attachments) while traveling in
reverse. To activate, turn the RMO key after the
PTO is engaged. The L.E.D. light will illuminate,
and the operator can then mow in reverse. Each
time the PTO is engaged, the RMO needs to be
reactivated if desired.
Ignition Switch
The ignition switch starts and stops the engine, it
has three positions:
OFF: Stops the engine and shuts off the
electrical system.
RUN: Allows the engine to run and powers
the electrical system.
START: Cranks the engine for starting.
Throttle Control
This controls the engine speed. Move the throttle
control FORWARD to increase engine speed and
BACK to decrease engine speed. Always operate
at FULL throttle.
Transmission Release Lever
This releases the transmission so that the tractor
can be pushed by hand.
15
en

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1696581-00

Table of Contents