Voice Dialing - Nokia N77 User Manual

Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see 'Profiles—set tones', p. 64.
If you do not want to answer a call, press
activated the Call divert
to divert calls, declining an incoming call also diverts the
call. See 'Call divert', p. 112.
When you select
incoming call, you can send a text message without
rejecting the call informing the caller that you cannot
answer the call. Select
set up this option and write a standard text message, see
'Call', p. 105.
Call waiting (network service)
You can answer a call while you have another call in
progress if you have activated
check the status of
Tools > Settings
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. To connect
an incoming call or a call on hold with an active call and
to disconnect yourself from the calls, select
Transfer. To end the active call, press
calls, select Options
70
> Voice calls > If busy
Silence to mute the ringing tone of the
Options > Send text
Call waiting in Tools. To
Call waiting, press , and select
> Call > Call waiting.
. The first call is put
. To end both
> End all calls.

Voice dialing

Your device supports enhanced voice commands.
Enhanced voice commands are not dependent on the
. If you have
speaker's voice, so the user does not record voice tags in
function
advance. Instead, the device creates a voice tag for the
entries in contacts, and compares the spoken voice tag to
it. The voice recognition in the device adapts to the main
user's voice to recognize the voice commands better.
The voice tag for a contact is the name or nickname that is
saved on the contact card. To listen to the synthesized
message. To
voice tag, open a contact card, and select
voice tag.
Make a call with a voice tag
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
When you use voice dialing, the loudspeaker is in use. Hold
the device at a short distance away when you say the voice
tag.
1
To start voice dialing, in the standby mode, press and
hold the right selection key. If you are using a
Options >
compatible headset with the headset key, press and
hold the headset key to start voice dialing.
Options > Play