Nokia N77 User Manual page 93

You can use Bluetooth connectivity in the
If Bluetooth connectivity is activated before entering the
Offline profile, it will be deactivated. To use Bluetooth
connectivity in the Offline
Settings
Press , and select Tools
the application for the first time, you are asked to define a
name for your device. After you set Bluetooth connectivity
on and change My phone's visibility
device and this name can be seen by other users with
devices using Bluetooth wireless technology.
Select from the following:
Bluetooth—To connect wirelessly to another compatible
device, first set Bluetooth connectivity On, then establish
a connection. To switch off Bluetooth connectivity, select
Off.
My phone's visibility—To allow your device to be found by
other devices with Bluetooth wireless technology, select
Shown to all. To hide it from other devices, select Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
compatible car kit enhancement, to use the SIM card in
your device to connect to the network, select On.
Offline profile.
profile, you must reactivate it.
> Bluetooth. When you open
to Shown to all, your
Remote SIM mode
To use the remote SIM mode with a compatible car kit
enhancement, set Bluetooth connectivity on, and enable
the use of the remote SIM mode with your device. Before
the mode can be activated, the two devices must be paired
and the pairing initiated from the other device. When
pairing, use a 16-digit passcode, and set the other device
as authorized. See 'Pair devices', p. 94. Activate the remote
SIM mode from the other device.
When remote SIM mode is on in your Nokia N77,
SIM is displayed in the standby mode. The connection to
the wireless network is turned off, as indicated by
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls, except to the emergency numbers
programmed into your device, while in this mode. To make
calls from your device, you must first leave the remote SIM
mode. If the device has been locked, enter the lock code to
unlock it first.
To leave the remote SIM mode, press the power key, and
select Exit rem. SIM mode.
Remote
in
93