depends on available memory.
•
There are three audio cues to indicate the recording status to both parties
in an active phone conversation. The start tone plays when recording
begins. A recording tone plays every 5 seconds while the conversation is
being recorded. An ending tone signals the end of the recording.
•
When the recording tone starts to beep every 2 seconds, you only
have 10 seconds left for your voice memo.
•
If the memory is full when you try to record a new voice memo, No
space for new recording appears on the screen. You have the choice
to erase an existing voice memo to free up space for the new recording.
• USE VOICE DIALING
Your phone's voice dialing feature allows handsfree operation while you
11
place a call. Before using this feature, you need to create entries in the
phone book so you can associate a "voice tag" with a name and number.
Add a voice tag to a phone book entry
To create entries in the phone book, see "Save names, numbers, and e-mail
addresses" on page 41.
1
At the Start screen, scroll to the name you want to give a voice tag.
2
Press Details, then Options, and scroll to Add voice tag.
3
Press Select. The phone displays Press Start, then speak after tone.
4
Press Start.
You will hear several beeps, and Please speak now appears. If you're
using the headset, release the button.
5
Speak clearly into the microphone.
Note: Do NOT press Quit unless you want to cancel the recording.
The phone automatically stops recording, then saves and replays the voice
tag.
[ 70 ]