Table of Contents
Advertisement
C a l l s
To reject an incoming call, press the end key. To mute the ringing tone, select Silence.
Dialing shortcuts
First assign a phone number to one of the number keys, 2 to 9. See "Assign dialing
shortcuts," p. 27.
Use a dialing shortcut to make a call in one of the following ways:
● Press a number key, then the call key.
● If Menu > Settings > Call > Speed dialling > On is selected, press and hold a
number key.
Voice dialing
Make a phone call by saying the name that is saved in the contact list of the phone.
As voice commands are language-dependent, you must select Menu > Settings >
Phone > Language settings > Recognition lang. and your language before using
voice dialing.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key or the volume down key.
A short tone sounds, and Speak now is displayed.
2. Speak the name of the contact you want to dial. If the voice recognition is successful,
a list with matches is shown. The phone plays the voice command of the first match
on the list. If it is not the correct command, scroll to another entry.
Options during a call
Many of the options that you can use during a call are network services. For availability,
contact your service provider.
During a call, select Options and from the following options:
Call options are Mute or Unmute, Contacts, Menu, Lock keypad, Record, Voice
clarity, Loudspeaker or Handset.
Network options are Answer or Reject, Hold or Unhold, New call, Add to
conference, End call, End all calls, and the following:
● Send DTMF — to send tone strings
● Swap — to switch between the active call and the call on hold
● Transfer — to connect a call on hold to an active call and disconnect yourself
● Conference — to make a conference call
● Private call — to have a private discussion in a conference call
18
Advertisement
Table of Contents
