External Audio Sources - Blaupunkt Kingston MP47 Operating And Installation Instructions

Display
Selecting a display illumination during a
colour scan
u Press the MENU/OK button ;.
u
Press the or
edly until "COL SCAN" appears on
the display.
u Press the MENU/OK button ; to
start the colour seek.
The device starts changing the display
illumination colour.
To select the currently set colour,
u press the MENU/OK button ;.
With the MENU/OK button ;, you can
start the colour seek again and select a
different colour.
If you found and selected the desired
colour,
u press the ESC/DIS button 5.
34
button < repeat-

External audio sources

External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device in two
ways:
1. Via the rear AUX input (if no CD changer
is connected to the device).
Notes:
• An adapter cable is needed to con-
nect an external audio source via the
rear AUX input. You can obtain this ca-
ble (Blaupunkt no.: 7 607 897 093)
from your Blaupunkt dealer.
With the SOURCE button =, you can
•
select the rear AUX input. The display
then shows "CDC / AUX".
2. Via the front AUX-IN socket.
Note:
As soon as an audio source is connect-
ed to the front AUX-IN socket, it can be
selected with the SOURCE button =.
The display then shows "AUX".
External audio sources