Sound - Blaupunkt Kingston MP47 Operating And Installation Instructions

Sound

You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, USB, AUX,
and telephone/navigation). The volume
distribution settings (balance and fader)
and X-BASS apply to all the audio sources
except for telephone/navigation. You can
adjust the volume distribution settings sep-
arately for telephone/navigation.
Note:
The settings of the sound for telephone/
navigation can only be made during a
telephone call/voice output.
This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and middle
and to adjust the level for the selected fre-
quency between -7 and +7. In addition, you
can adjust the quality factor for bass and
middle.
Note
The quality factor determines the fi lter
quality of the equalizer, i.e. the edge
steepness and fi lter bandwidth, de-
pendent upon the characteristic fre-
quency.
A low quality factor means a low edge
steepness and a high fi lter bandwidth;
a high quality factor means a high edge
steepness and a low fi lter bandwidth.
The following table shows an overview of
the setting options:
BASS
GAIN x
Frequency
x
(FREQ)
Quality
factor x
(QFAC)
To adjust the bass and treble levels quickly
and conveniently for a simple sound adjust-
ment, these settings are located directly in
the AUDIO menu. In the submenus BASS
and TREBLE, you can perform the GAIN
setting:
Audio
BASS
Level GAIN
Frequency FREQ
Quality QFAC
factor
To adjust the bass and treble levels, please
read the chapters "Adjusting BASS" and
"Adjusting TREBLE".
To fully utilise the equalizer functions, all
other settings can be made in the submenu
ENHANCED of the AUDIO menu. In the sub-
menus E-BASS (equalizer bass), E-TREBLE
(equalizer treble) and E-MIDDLE (equal-
izer middle), you can perform the settings
Sound
TREBLE MIDDLE
x x
x x
– x
TREBLE
GAIN GAIN
FREQ FREQ
– QFAC
27