Inserting/Removing The Card - Panasonic DMC-FX50 Operating Instructions Manual

Hide thumbs Also See for DMC-FX50:
Table of Contents

Advertisement

Downloaded from ManualsCamera.com Manuals
Inserting/Removing
the Card
• Check that the camera is turned off and
that the lens is retracted.
• Prepare an SD Memory Card (supplied), an
SDHC Memory Card (optional) or a
MultiMediaCard (optional).
1 Slide the release lever in the
direction of the arrow and open
the card/battery door.
OPEN LOCK
2 Insert:
Insert the card fully until it clicks
and it is locked.
Remove:
Push the card until it clicks, then
pull the card out upright.
• Check the direction of the card.
• Do not touch the connection terminals
on the back side of the card.
• The card may be damaged if it is not
fully inserted.
3
Close the card/battery door.
Slide the release lever in the
direction of the arrow.
OPEN LOCK
• If the card/battery door cannot be
completely closed, remove the card and
insert it again.
• The card and the data may be damaged
if it is inserted or removed while the
camera is on.
• We recommend using Panasonic's SD
Memory Card/SDHC Memory Card.
Preparation
15
VQT0Y19

Advertisement

Table of Contents
loading

Table of Contents