Basic; Taking Pictures - Panasonic DMC-FX50 Operating Instructions Manual

Downloaded from ManualsCamera.com Manuals

Basic

Taking Pictures

The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
1
Turn the camera on.
Select normal picture mode
[ ].
OFF ON
2 Aim the AF area
to the point
you want to focus on and then
press the shutter button halfway.
F2.8 1/25
• : Press the shutter button halfway to
focus.
• The focus indication lights and then
the aperture value and the shutter
speed are displayed.
• When the ISO sensitivity is set to
[ ], the shutter speed will not be
displayed. (P73)
• If [ ] or [ ] is used in AF mode,
the AF area does not appear until the
subject is brought into focus. (P77)
• The AF area displayed is bigger than
usual when using the digital zoom or
when taking pictures in dark places.
(P77)
When the When the
subject is not subject is
focused focused
Focus Blinks (green) On (green)
indication
AF area Turns white to Turns white to
red or no AF green
area
Sound Beeps 4 times Beeps 2 times
3 Take a picture.
F2.8 1/25
• : Press the shutter button fully to take
the picture.
• We recommend checking that the clock is
set properly before taking pictures. (P17)
• When you press the shutter button, the
screen may become bright or dark for a
moment. This function allows easy
adjustment of focus and the recorded
picture will not be affected.
• When a time is set for power save (P20),
the camera automatically turns off if you
do not operate it within the set time. To
operate the camera again, press the
shutter button halfway or turn the camera
off and on.
• To avoid noise, we recommend
decreasing the ISO sensitivity (P73) or
setting [PICT.ADJ.] to [NATURAL]. (P79)
(ISO sensitivity is set to [AUTO] when the
camera is shipped. Therefore, when
taking pictures indoors etc. the ISO
sensitivity increases.)
Basic
23
VQT0Y19