To edit the settings manually, select
configuration
> Disabled, and define the following:
Long retry limit
— Enter the maximum number of
•
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
Short retry limit
— Enter the maximum number of
•
transmission attempts if the device does not receive a
clear-to-send signal from the network.
RTS threshold
— Select the data packet size at which
•
the WLAN access point device issues a request to send
before sending the packet.
TX power level
— Select the power level of your device
•
when sending data.
Radio measurements
•
measurements.
Power saving
— Select whether to use the WLAN
•
power saving mechanism to save the power in the
device battery. Using the power saving mechanism
enhances the battery performance but may weaken
WLAN interoperability.
To restore all settings to their original values, select
Options
Restore
defaults.
>
WLAN security settings
Select
Menu
Ctrl. panel
>
Destinations
Access
>
on the display.
To edit a wireless LAN (WLAN) access point, open one of
the access point groups, and select an access point marked
with
.
Automatic
— Enable or disable the radio
Settings
and
Connection
>
point, and follow the instructions
To enter the settings for the selected security mode, select
WLAN security
settings.
WEP security settings
Select
WEP
as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the required
WEP keys. When the WEP security mode is in use, and your
device receives a data packet not encrypted with the WEP
keys, the data is discarded.
In an ad-hoc network, all devices must use the same WEP
key.
Select
WLAN security settings
WEP key in use
•
Authentication type
•
WEP key settings
•
WEP key settings
In an ad-hoc network, all devices must use the same WEP
key.
Select
WLAN security settings
>
from the following:
WEP encryption
•
key length.
WEP key format
•
the WEP key data in
WEP key
— Enter the WEP key data.
•
and from the following:
— Select the desired WEP key.
— Select
Open
or Shared.
— Edit the settings for the WEP key.
WEP key settings
>
— Select the desired WEP encryption
— Select whether you want to enter
ASCII
or
Hexadecimal
and
format.
139