Wlan Security Settings; Advanced Wlan Settings; Wep Security Settings; Wep Key Settings - Nokia E71 User Manual

Settings
This setting is not available unless you select
availability > Yes.

Advanced WLAN settings

Select Options Advanced
>
settings are normally defined automatically, and changing
them is not recommended.
To edit the settings manually, select
configuration > Disabledand define the following:
Long retry limit — Enter the maximum number of
•
transmission attempts if the device does not receive a
receiving acknowledgement signal from the network.
Short retry limit — Enter the maximum number of
•
transmission attempts if the device does not receive a
clear-to-send signal from the network.
RTS threshold — Select the data packet size at which the
•
WLAN access point device issues a request to send before
sending the packet.
TX power level — Select the power level of your device
•
when sending data.
Radio measurements
•
measurements.
Power saving — Select whether to use the WLAN power
•
saving mechanism to save the power in the device battery.
Using the power saving mechanism enhances the battery
performance but may weaken WLAN interoperability.
To restore all settings to their original values, select
Options Restore defaults.
>
132
Show WLAN
settings. The advanced WLAN
Automatic
— Enable or disable the radio

WLAN security settings

Select Menu Tools
> >
points Options New access
> >
point and Options > Edit.
In the access point settings, select
the desired mode.

WEP security settings

Select WEP as the WLAN security mode.
The wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the network
is denied to users who do not have the required WEP keys.
When the WEP security mode is in use, and your device
receives a data packet not encrypted with the WEP keys, the
data is discarded.
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings
WEP key in use — Select the desired WEP key.
•
Authentication type
•

WEP key settings

— Edit the settings for the WEP key.
•
WEP key settings
In an ad-hoc network, all devices must use the same WEP key.
Select WLAN security settings
from the following:
© 2008-2009 Nokia. All rights reserved.
Settings Connection
>
point, or select an access
WLAN security mode
and from the following:
— Select Open or Shared.
WEP key settings
>
Access
>
and
and