Application Settings - Nokia E52 User Manual

Port — Enter the port number of the proxy server.
•
Edit registration servers
Select Options
>
server.
Select from the following:
Registrar server address
•
IP address of the registrar server in use.
Realm — Enter the registrar server realm.
•
User name and
•
password for the registrar server.
Transport type
•
Port — Enter the port number of the registrar server.
•
Configuration settings
Select Menu Ctrl. panel
>
Configurations.
You can receive messages from your service provider or
company information management containing
configuration settings for trusted servers. These settings
are automatically saved in Configurations. You may
receive configuration settings for access points,
multimedia or e-mail messaging services, or
synchronisation settings from trusted servers.
To delete configurations for a trusted server, select
Options > Delete. The configuration settings for other
applications provided by this server are also deleted.
142
New SIP profile or Edit
— Enter the host name or
Password — Enter your user name and
— Select UDP, Automatic, or TCP.
Settings and Connection
>
Restrict packet data
Select Menu
APN control.
With the access point control service, you can restrict
Registrar
>
packet data connections from your device to certain access
points only. Your SIM card may not support the access
point control service. For more information, contact your
service provider.
To restrict packet data connections from your device,
select Options
PIN2 code to activate and deactivate access point control
or to edit the packet data access points on the control list.
To add access points that can be used for packet data
connections to the control list, select
name manually. To enable connections to an operator-
provided access point, create an empty access point.
To remove access points from the list, select
>
Remove.

Application settings

Select Menu
Applications.
Select an application from the list to adjust its settings.
Ctrl. panel Settings
> >
Activate restrictions. You need your
>
Options
Ctrl. panel Settings
> >
and Connection
>
Add
>
Options
>
and