Wlan Settings; Advanced Wlan Settings - Nokia E52 User Manual

IPv4 settings
•
the subnet IP address, the default gateway, and the IP
addresses of the primary and secondary DNS servers.
Contact your internet service provider for these
addresses.
IPv6 settings
•
Ad-hoc channel
•
a channel number (1-11) manually, select
defined.
Proxy server address
•
proxy server.
Proxy port number
•
Packet data (GPRS) settings
Select Menu Ctrl. panel
>
Packet data.
Your device supports packet data connections, such as
GPRS in the GSM network. When you are using your device
in GSM and UMTS networks, it is possible to have multiple
data connections active at the same time; access points
can share a data connection, and data connections remain
active, for example, during voice calls.
To define the packet data settings, select
connection and When available
the packet data network when you switch the device on
in a supported network, or
device to a packet data network only when an application
or action attempts to establish a packet data connection.
This setting affects all access points for packet data
connections. To use the device as a packet data modem
for your computer, select
138
access point name provided by your service provider. To
— Enter the IP address of your device,
— Define the type of DNS address.
(only for ad hoc networks) — To enter
— Enter the address for the
— Enter the proxy port number.
Settings and
>
Packet data
to register the device to
When needed
Access point, and enter the
use a high-speed data connection, select
packet access

WLAN settings

Select Menu
Wireless
User
To have an indicator displayed when there is a wireless
LAN (WLAN) available in your current location, select
WLAN availability
To select the interval for your device to scan for available
WLANs, and to update the indicator, select
networks. This setting is not available unless you select
Show WLAN availability
Connection
To set the device to test the internet capability of the
>
selected WLAN automatically, to ask for permission every
time, or to never perform the connectivity test, select
Internet connectivity test
every time, or
automatically
device asks for it, and the connectivity test is performed
successfully, the access point is saved to internet
destinations.
To check the unique media access control (MAC) address
that identifies your device, enter *#62209526# in the
home screen. The MAC address is displayed.
to register the

Advanced WLAN settings

Select Options
WLAN settings are normally defined automatically, and
changing them is not recommended.
> Enabled.
Ctrl. panel Settings
> >
LAN.
> Yes.
> Yes.
Run
>
Never run. If you select
or allow the test to be performed when the
Advanced settings. The advanced
>
High speed
and Connection
>
Show
Scan for
automatically, Ask
Run