Troubleshooting; Restore Original Settings; What To Do When The Memory Is Full; Message Indicator Blinking - Nokia C7-00 User Manual

74

Troubleshooting

Lock code (also known as security
code) — The lock code helps you to
protect your device against
unauthorized use. You can create and
change the code, and set the device to
request the code. Keep the new code
secret and in a safe place separate from
your device. If you forget the code and
your device is locked, your device will
require service and additional charges
may apply. Additional charges may apply,
and all the personal data in your device
may be deleted. For more information,
contact a Nokia Care Point or your device
dealer.
Troubleshooting

Restore original settings

If your device is not working properly,
you can reset some settings to their
original values.
1 End all active calls and connections.
2 Select Menu
Settings and
management
Restore.
3 Enter the lock code.
This does not affect documents or files
stored on your device.
After restoring the original settings, the
device switches off, and then on again.
This may take longer than usual.

What to do when the memory is full?

If either of the following messages is
displayed when you are deleting several
items at the same time, delete items one
by one, beginning with the smallest
items:
•
Not enough memory to perform
operation. Delete some data first.
Help & Settings
>
Phone Phone
>
Factory settings
>
•
Memory low. Delete some data from
phone memory.
Move content that you want to keep to
the mass memory, a compatible memory
card (if available), or to a compatible
computer. If possible, install applications
to the mass memory or memory card,
rather than the device memory.

Message indicator blinking

Q: Why is the message indicator blinking
in the home screen?
A: The maximum number of messages
are stored on your device. Delete some
messages. The number of messages that
can be stored on the SIM card is
considerably lower than the number that
can be stored in the device memory. You
can use Nokia Ovi Suite to save messages
to a compatible computer.
A contact appears twice in the contacts
>
list
Q: I have a contact twice in my contacts
>
list. How can I remove the extra
contact?
A: You can merge two contacts into one.
Select Options
the contacts to merge, and select
Merge.
Unreadable characters while browsing
the web
If unreadable characters are displayed,
select Menu
Page Default encoding
>
encoding for the character set of the
language.

Prepare your device for recycling

If you buy a new device, or otherwise
want to dispose of your device, Nokia
Merge contacts, select
>
Web and
> >
and the correct
>