Protect Your Device; Connectivity; Internet Connections - Nokia C7-00 User Manual

Tip: If you save the details, it is easier to
later exchange the same content with
the same device.

Protect your device

Set your device to lock automatically
Want to protect your device against
unauthorized use? Define a lock code,
and set your device to lock itself
automatically when you're not using it.
1 Select Menu
Settings and
management
Phone and SIM
2 Select Lock code, and enter a lock
code. A minimum of 4 characters is
required, and numbers, symbols, and
upper and lower case letters can be
used.
Keep the lock code secret and in a
safe place separate from your
device. If you forget the lock code
and your device is locked, your
device will require service. Additional
charges may apply, and all the
personal data in your device may be
deleted. For more information,
contact a Nokia Care point or your
device dealer.
3 Select Phone autolock
define the length of time after which
the device is locked automatically.
Lock your device manually
In the home screen, press
phone, and enter the lock code.
Unlock your device
Slide the lock switch, enter the lock code,
and select OK.
If the lock switch is out of reach, press
the menu key, and select Unlock.
Help & Settings
>
Phone Phone
>
Security settings
>
card.
period, and
, select
Lock your device remotely
Forgot your device at work and want to
lock it to prevent unauthorized use? You
can lock your device remotely using a
predefined text message. You can also
lock the memory card remotely.
Enable remote locking
1 Select
Settings
management
>
Phone and SIM card
phone locking
>
2 Enter the text message content. It
can be 5-20 characters, and both
upper and lower case letters can be
used.
3 Enter the same text again to verify it.
4 Enter the lock code.
Send the lock message
To lock the device remotely, write the
predefined text, and send it to your
device as a text message.
To unlock your device, you need the lock
code.

Connectivity

Internet connections

Define how your device connects to the
internet
Your device automatically checks for and
connects to an available known network
Lock
when a network connection is needed.
Selection is based on the connection
settings, unless there are application-
specific settings applied.
Select Menu
Settings
Connectivity
Menu Help & Settings
>
and Phone
>
Security settings
>
>
> Enabled.
Help & Settings
>
and Connectivity
67
>
Phone
>
Remote
>
> Settings.