Table of Contents
Advertisement
Shipping preparation
Follow these suggestions when preparing to ship the computer:
1.
Back up the hard drive files on PD discs, tape cartridges, CDs, or USB flash drives. Be sure that
the backup media is not exposed to electrical or magnetic impulses while stored or in transit.
NOTE:
2.
Remove and store all removable media.
3.
Turn off the computer and external devices.
4.
Disconnect the power cord from the electrical outlet, and then from the computer.
5.
Disconnect the system components and external devices from their power sources, and then
from the computer.
NOTE:
shipping the computer.
6.
Pack the system components and external devices in their original packing boxes or similar
packaging with sufficient packing material to protect them.
The hard drive locks automatically when the system power is turned off.
Ensure that all boards are seated properly and secured in the board slots before
Shipping preparation
29
Advertisement
Table of Contents
