Table of Contents
Advertisement
8.
To remove a SODIMM, press outward on the two latches on each side of the SODIMM (1), and
then pull the SODIMM out of the socket (2).
NOTE:
lock before removing or installing a SODIMM.
9.
Slide the new SODIMM into the socket at approximately a 30° angle (1), and then press the
SODIMM down (2) so that the latches lock it in place.
NOTE:
with the tab on the memory socket.
10.
Replace the access panel.
11.
If the computer was on a stand, replace the stand.
14
Chapter 2 Hardware upgrades
If a solenoid hood lock is installed in the computer, it may be necessary to remove the
A memory module can be installed in only one way. Match the notch on the module
Advertisement
Table of Contents
