FujiFilm FinePix F40fd Owner's Manual page 154

Troubleshooting
Z Connecting
Matters
Connecting to TV
Connecting to PC
Connecting to
printer
154
Downloaded From camera-usermanual.com Fujifilm Manuals
Problems
The camera is not connected to the TV
correctly.
The included A/V cable was connected
There is no image during movie playback.
or sound on the
"TV" is selected as the TV input.
TV.
The video output setting is incorrect.
The TV volume is turned down.
The TV image is The video output setting is incorrect.
black and white.
PC does not The USB cable (included) is not correctly
recognize the connected to the PC or camera.
camera.
The USB cable (included) is not correctly
Cannot print with
connected to the printer or camera.
PictBridge.
The printer is not turned on.
Possible causes Solutions
Connect the camera and TV correctly.
After the movie playback mode is stopped,
connect the camera and TV correctly.
Set the TV input to "VIDEO".
Change the setting to NTSC or PAL.
Adjust the volume.
Change the setting to NTSC or PAL.
Set up the camera, and connect the USB
cable (included) correctly.
Set up the camera, and connect the USB
cable (included) correctly.
Turn the printer on.
Page
117
–
–
106,
108
–
106,
108
128
118
–