FujiFilm FinePix F40fd Owner's Manual page 146

Warning Displays
Warning Displayed
DPOF FILE ERROR
CAN NOT SET DPOF
r CAN NOT SET DPOF
CAN NOT ROTATE
r CAN NOT ROTATE
COMMUNICATION
ERROR
CANNOT BE
TRANSMITTED
CANNOT BE RECEIVED
PRINTER ERROR
146
Downloaded From camera-usermanual.com Fujifilm Manuals
Explanation
Prints were specified for 1000 or more frames in the
DPOF frame settings.
An attempt was made to specify DPOF settings for
an image that is not supported by DPOF.
An attempt was made to rotate a movie or an image
shot using a camera other than FinePix F40fd /
FinePix F45fd / FinePix F47fd.
The camera is not connected to a PC or printer.
• An attempt was made to send a movie or an image
shot by the camera other than FinePix F40fd /
FinePix F45fd / FinePix F47fd (
• Transmission was disconnected during IR
communication.
Transmission was disconnected during IR
communication.
Displayed for PictBridge.
The maximum number of frames for which prints can
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
DPOF printing cannot be used with this image
format.
These images cannot be rotated by image formats.
• Check that the USB cable (included) is connected
correctly.
• Check that your PC or printer is turned on.
• When using infrared transmission function,
transmit the image data within the camera's or
another device's transmission range.
• The image format is not transmittable.
• A movie can not be sent.
is displayed).
• Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
Do not move the camera out of the transmission
distance. Do not place anything between the
transmitting and receiving devices.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Remedy