Table of Contents
Advertisement
Available languages
Available languages
!9 12 V DC power terminal [DC 12V IN]
This connector is used to connect an external DC
power supply of 12 volts (3 A or more).
Compatible connector (as of September 2012): HR10A-
7P-4S (73) manufactured by HIROSE ELECTRIC
CO., LTD.
Pin array of the compatible connector
1
4
2
3
(Connector of the cable)
@0 Remote terminal [REMOTE]
This port is used to perform external control.
(D-sub 9-pin connector, male)
1
6
Pin No.
1
2
3
4
5
6
7
8
9
@1 S-video output connector [S-VIDEO]
This connector provides the luminance signal (Y) output
with synchronizing signal and color signal (C) output.
12
5
9
Signal
GND
TXD
RXD
DSR
GND
DTR
CTS
RTS
GND
@2 RGB/YPbPr output connector [RGB/YPbPr]
This connector provides the RGB signal (red, green, and
blue) output or the YPbPr signal (luminance, color differ-
ence B, and color difference R) output. The output sig-
nal can be set up with use of "OUTPUT SEL" in the
SETUP menu. (☞ Page 21)
(D-sub 9-pin connector, female)
5
1
9
6
Pin No.
Output signal
1
GND
2
GND
3
R, Pr
4
G, Y
5
B, Pb
6
VIDEO
7
SYNC
8
GND
9
GND
Advertisement
Chapters
Table of Contents
