Panasonic GP-US932CSXE Operating Instructions Manual page 11

<Rear>
!5 Video output connector [VIDEO]
!4 SDI output connector [SDI]
!3 HDMI output connector [HDMI]
@2 RGB/YPbPr output connector [RGB/YPbPr]
@1 S-video output connector [S-VIDEO]
!3 HDMI output connector [HDMI]
This connector is used to connect to an HDMI-ready
monitor.
!4 SDI output connector [SDI]
This terminal provides HD-SDI or SD-SDI output signal.
Important:
• Please use a high quality cable compatible with HD-SDI.
!5 Video output connector [VIDEO]
This connector provides composite video output signal.
!6 Synchronizing signal output/input connector
[SYNC]
This connector provides external synchronizing output
or input signal.
When the synchronizing signal output/input selection
switch !7 is set to "IN", this connector can provide the
synchronizing input signal. When the synchronizing sig-
nal output/input selection switch !7 is set to "OUT", this
connector provides the synchronizing output signal.
(☞ Page 28)
Important:
• The video format shall be the same among the synchro-
nized devices.
!7 Synchronizing signal output/input selection switch
[OUT/IN]
This switch toggles synchronizing signals between out-
put and input.
When the synchronizing signal output is selected, set
this switch to "OUT". When the synchronizing signal
input is selected, set this switch to "IN".
!6 Synchronizing signal output/input connector [SYNC]
!7 Synchronizing signal output/input selection switch
[OUT/IN]
!9 12 V DC power terminal [DC 12V IN]
@0 Remote terminal [REMOTE]
!8 Function setup switches
Switch No. 1 - 3 select a video format for RGB/YPbPr
output connector, SDI output connector, and HDMI out-
put connector.
Switch No. 4 selects the control method.
Switch
HDMI
Output
1 2 3
ON − ON 1080p
OFF − ON 1080p(sF)
ON OFF OFF 1080i
ON ON OFF 720p
OFF − OFF 576p
Switch OFF
4 REMOTE
(External control)
Note:
• When the REMOTE terminal is used, set Switch 4 to
"OFF" after turning off the power.
When Switch 4 is set to "OFF", button operations on the
front face are disabled.
!8 Function setup switches
SDI RGB/
Output YPbPr
1080i 1080i
1080p(sF) 1080p(sF)
1080i 1080i
720p 720p
576i 576i
–: Either ON or OFF
ON
FRONT SW
(Button operation via
front face)
11