Assembling Your Steam Mop - Shark S2901BR Owner's Manual

Assembling Your Steam Mop

fig. 1
IMPORTANT: Always make sure the mop is
UNPLUGGED from the wall when not in use.
Never fill the mop, attach the mop head,
change or remove the cleaning pocket when
the mop is plugged into the wall. To prolong
the life of your Shark
Pocket Mop Lite we recommend using
®
distilled water. Make sure you only add water
to the tank. Chemicals or cleaning solution
may damage the appliance and could be
unsafe for you and your family.
Multi-Function Steam
®
fig. 2
STEAM MOP ASSEMBLY
1
Insert the Mop Handle end with the "
front of the unit into the handheld steamer. Push the
mop handle in until you hear it click into place. (fig. 1)
2
Fit one side of the pocket onto the head first, then
using the loop, pull the pocket over the head. Attach
the quick fasteners on the top of the pocket to
secure in place.
3
Snap the mop head into the mop body by lining up
the groove on the back of the mop body with the
groove on the back of the mop head. Push until you
hear it latch into place. Press the release button to
remove or change the mop head. (fig. 2)
www.polishop.com.br/atendimento
" facing the
6