Using Your Steam Mop - Shark S2901BR Owner's Manual

Using Your Steam Mop

IMPORTANT: Make sure you do not use the mop
without attaching a cleaning pocket and adding
water to the tank first. When you are using the
mop for the first time, it might take longer than
the normal 30 seconds to start steaming.
1
Turn the water tank cap counter clockwise and
remove from the tank. (fig. 3)
2
Use the filling flask and pour water into the tank. Do
not overfill. Replace the cap on the water tank. (fig. 4)
IMPORTANT: Do not use on unsealed wood or
unglazed ceramic floors. On surfaces that have
been treated with wax or some no wax floors,
the sheen may be removed by the heat and
steam action. It is always recommended to test
an isolated area of the surface to be cleaned
before proceeding. We recommend that you
check the use and care instructions from the
floor manufacturer.
7 11 3444-0175
fig. 3
fig. 4
3
4
5
NOTE: To prolong the life of your Steam Mop, we
recommend using distilled water.
NOTE: Sweep or vacuum your floors prior to cleaning
with your Steam Mop.
Pull and twist the quick release cord holder to unwrap
the power cord completely. Plug into an electrical
outlet. (fig. 5)
Press the power button to turn the unit on. (fig. 6)
Clean your floors with a forward and backward
motion.
fig. 5
fig. 6