Led Explanation - TP-Link re210 User Manual

LED Explanation:


Name Status
Flashing green WPS connection in progress. It may take up to 2 minutes.
Solid green
Solid orange
WPS
Solid red
Off
On
2.4G
Off
On
5G
Off
On
Off
Power
Flashing
On
Ethernet
Off
RE: If your Wireless router or AP supports WPS or QSS function, you can press the WPS or

QSS button and then press the RE button to establish a secure connection between the
Wireless router or AP and the Range Extender RE210.
Power: The switch for the power.

Reset: This button is used to restore the Range Extender's factory default settings.

There are two ways to reset the Range Extender's factory defaults:
Method One: With the Range Extender powered on, press and hold the Reset button (about
6 seconds) until all the LEDs turn on momentarily, then release the button and wait the Range
Extender to reboot to its factory default settings.
Method Two: Restore the default settings from "System Tools > Factory Defaults" of the
Range Extender's Web-based Management page.
LED: LED light switch.

Ethernet: One 10/100/1000Mbps RJ45 Ethernet port used to add wireless connectivity to an

Ethernet-enabled device such as Internet TV, DVR, Gaming console and so on. Please note
that this port is not allowed to be connected with router or AP.
RE210
The Range Extender has established a secure connection, and the
signal strength is adequate.
The Range Extender has established a secure connection, but the
signal strength is too strong.
The Range Extender has established a secure connection, but the
signal strength is too weak.
No active connection.
The Range Extender is connected to the 2.4G wireless network of
your main Router/AP.
The Range Extender isn't connected to your main Router/AP.
The Range Extender is connected to the 5G wireless network of
your main Router/AP.
The Range Extender isn't connected to your main Router/AP.
The Range Extender is on.
The Range Extender is off.
The Range Extender is initializing.
A device is connected to the ETHERNET port.
No device is connected to the ETHERNET port.
Table 1-1
3
AC750 Wi-Fi Range Extender User Guide
Indication