High Speed; Wireless Statistics - TP-Link re210 User Manual

4.4.5 High Speed

Selecting Wireless > High Speed allows you to configure the wireless mode for your device
(show in Figure 4-15).
Concurrent-Dual Band Range Extender – Extends both 2.4GHz and 5GHz bands for the

router.
High Speed Mode – Boost the WiFi speed but only one band could be extended.

High Speed Mode 1 – Connect to the router on 2.4GHz only and connect to the WiFi

clients on 5GHz only;
High Speed Mode 2 – Connect to the router on 5GHz only and Extend to the WiFi clients

on 2.4GHz only.

4.4.6 Wireless Statistics

Selecting Wireless > Wireless Statistics will allow you to see the wireless transmission
information in the following screen shown in Figure 4-16.
MAC Address - Shows the connected wireless station's MAC address.

Current Status - The connected wireless station's running status, one of STA-AUTH /

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected.
Received Packets - packets received by the station.

Sent Packets - packets sent by the station.

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.
RE210 AC750 Wi-Fi Range Extender User Guide
Figure 4-15 High Speed
Figure 4-16 Wireless Statistics
20