9.
Remove the Input/Output bracket.
Installing the Input/Output Board
1.
Align the Input/Output board with the Input/Output bracket and tighten the
screws securing the Input/Output board.
2.
Insert the Input/Output bracket into the slot on the chassis front.
3.
Tighten the screws to secure the Input/Output bracket.
4.
Connect the Input/Output board data cable to the system board.
drive cage .
5.
Install the
front bezel .
6.
Install the
cover .
7.
Install the
8.
Follow the procedures in
36
After Working Inside Your Computer .